Specification: Item Type: Table Saw Material: Aluminum alloy, acrylic Power: 96W Working Voltage: DC12V-24V Ruler Angle: 0-90° Cutting Thickness: Approx. 26-29mm / 1-1.1in Chuck Range: Approx. 1.5-10mm / 0.1-0.4in Motor Speed: 9000/min Saw Blade Aperture: Approx. 16mm / 0.6in, 20mm / 0.8in Functions: Cutting, grinding, polishing and engraving, punching, forward and reverse, adjustable table top, flip chip electric milling. Package List: 1 x Table Saw 1 x Speed Control Power 1 x Power Cord 1 x Baffle 2 x Aluminum Alloy Fence 1 x Angle Ruler 1 x User Manual 1 x Saw Blade 3 x Cutting Blades 1 x Orange Caliper 1 x Drill Chuck 1 x Wrench 1 x Transparent Triangular Ruler 3 x Round Trimmers 3 x Hex Fixed Pins 5 x Abrasive Disc 1 x Grinding Disc How to Use: 1. Groove Milling : Install the fence and milling cutter, adjust the milling cutter to a suitable position, and then start to work. 2. Punching: After installing the electric router fence and milling cutter, press the wood block against the fence and press down the hole. The aperture can be adjusted according to the size of the milling cutter. 3. Edge Milling: Install the electric router fence and milling cutter, align the scale, and then start milling. How to Install Saw Blade: 1. First remove the 4 screws on the table, loosen the saw blade clamp with a wrench, and then remove the outer saw blade clamp 2. After installing the saw blade, tighten it to use. (Turning counterclockwise is to loosen the saw blade) How to Install Drill chuck: 1. First fix the connecting rod and the joint 2. Use a wrench to tighten the screws Note: Flexible shafts need to be purchased separately.