Rated power: 1100 W Voltage: 110 V Rated frequency: 50 Hz Rated rotating speed: 2800 R/MIN Rated current: 5.3 A Insulation: Class E Weight: 16 KG Instructions: 1. Cover the cover, lock the wing nut at both ends, adjust the hand wheel in the thick direction, so that the two grinding discs have no connect, the wrench is stuck on the motor shaft card plate and swings left and right without block, and the swing is flexible, remove the wrench to start the motor; 2. After the motor is running normally, turn the handwheel in a thin direction during operation and hear the slight friction of the grinding disc. Through the housing, you can visually see the dynamic and static grinding disc. Do not adjust the fineness to make the connect too tight. Motor overload will greatly reduce work efficiency. Note: Do not turn the grinding disc too tightly, which will cause: 1. The flow of the ingredients is too narrow, and the ingredients are squeezed; 2. The life of the grinding disc and the motor will be shortened; 3. The card machine is easy to burn, and it is necessary to turn off the power in time; 4. If you want to adjust to the delicate degre you like, adjust the thickness knob while put the material. If the grinding is uneven, repeated grinding will slowly become experienced.